+971 650 626 00 | Enquire Now
Passenger Vehicle
Lubricants
Commercial Vehicle Lubricants
Industrial & Marine Lubricants
Home Industrial & Marine Lubricants Lubricating Greases Mobilux™ EP Series
Mobilux™ EP Series
Mobilux™ EP 0, 1, 2, 3, 460, 004 and 023 products are a high performance family of five general-purpose industrial greases and two special-duty semi-fluid greases. These lithium hydroxystearate greases are formulated to provide extra protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3, with base oil viscosities ISO VG 150, 320 and 460.
Mobilux™ EP 0, 1, 2, 3 and 460 greases are recommended for most types of industrial applications including heavy-duty applications where high unit pressures or shock loads are present. These greases provide excellent protection against rust and corrosion and resist water wash-out which makes them particularly suitable for equipment where moist or wet conditions are common. Mobilux™ EP 0 and 1 are suitable for centralised systems. Mobilux™ EP 2 and 3 are general-purpose greases and Mobilux™ EP 460 is used in heavy-duty applications such as the wet ends of paper machines. The recommended operating temperature range is from -20ºC to 130ºC (0ºC to 130ºC for Mobilux™ EP 460) but they may be used at higher temperatures if the lubrication frequency is increased accordingly.
Mobilux™ EP 004 and Mobilux™ EP 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases they can also be used in many other industrial applications where conventional gear oils cannot be retained in gear cases, chain cases, etc. because of leakage due to worn or missing seals. The recommended operating temperature range is -25 to 120ºC for Mobilux™ EP 004 and -15 to 120ºC for Mobilux™ EP 023.
Features and Potential Benefits
Mobilux™ EP greases have a long history of proven performance and have demonstrated good performance in the areas of corrosion protection, low temperature pumpability and high temperature service life. A Timken OK load of 40 lb illustrates their load carrying and extreme pressure capability.
- Reduced wear under heavy or shock loading and vibration for good equipment reliability and availability
- Protection against rust and corrosion and resistance to water washout for equipment protection and good lubrication even in presence of water
- Extended bearing life potential in wet environments for reduced bearing costs and unanticipated downtime
- Good pumpability in centralised systems (Mobilux™ EP 0 and 1)
- Effective leakage control (Mobilux™ EP 004 and Mobilux™ EP 023)
Specifications and Approvals
Mobilux™ EP Series meets or exceeds the requirements of:
EP 0
EP 023
EP 1
EP 2
EP 3
EP 004
EP 460
DIN 51825:
(2004-06)
DIN 51826:
(2005-01)
-
GPOG-20
KP1K-
30
-
КРЗК-
20
-
-
GP00G-20
KP2K-
20
-
КР2К-
30
-
-
GP000G-20
Mobilux™ EP Series has the following builder approvals:
EP 0
EP 023
EP 1
EP 2
EP 3
EP 004
EP 460
AAR-942
MAG IAS, LLC
-
-
-
X
-
-
-
Applications
- Mobilux EP™ 0 and EP 1 provide good low temperature pumpability and are suitable for centralised lubrication systems and other applications where low temperature performance is required.
- Mobilux EP™ 2 is recommended for multipurpose applications in antifriction and plain bearings, bushings and pins under normal operating conditions.
- Mobilux EP™ 3 is a stiffer NLGI grade 3 grease recommended for applications where maximum protection against penetration of water or solid contaminants is required.
- Mobilux EP™ 460 is recommended for the lubrication of low to moderate speed, heavily loaded bearings including those subject to high unit pressures or shock loads. These include steel and paper mills, underground mining, tunneling, ore crushing plants and other heavy-duty applications where moist or wet conditions are common.
- Mobilux EP™ 004 and Mobilux EP™ 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gear cases on most underground mining machinery with the exception of electric motor gearings. Mobilux EP™ 004 and Mobilux EP™ 023 can also be used in many other industrial applications where conventional gear oils cannot be retained in equipment such as gear cases, chain cases, because of leakage due to worn or missing seals. Mobilux EP™ 004 passes the SEW 1008 hour gear test requirement DR.EM.203 mod.
Typical Properties
Mobilux™ EP Series
EP 0
EP 023
EP 1
EP 2
EP 3
EP 004
EP 460
NLGI Grade
0
1
2
3
2
00
000
Thickener Type
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Lithium
Color, Visual
Brown
Brown
Brown
Brown
Brown
Brown
Brown
Penetration, Worked, 25°C, ASTM D 217
370
325
280
235
280
415
460
Viscosity of Oil, ASTM D 445 cSt@ 40°C
160
160
160
160
460
160
320
Timken OK Load, ASTM D 2509, Ib
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Refer to your vehicle service manual for correct lubricant requirement and service intervals. Search the database for the latest product data sheet you need here.
40
40
40
40
40
40
40
4-Ball Wear, ASTM D 2266, Scar, mm
0.4
0.4
0.4
0.4
0.4
0.5
0.4
4-Ball Weld Load, ASTM D 2596, Kg
250
250
250
250
250
250
250
Dropping Point, D 2265, C
190
190
190
190
190
-
-
Rust Protection, ASTM D 6138, Distilled Water
0-0
0-0
0-0
0-0
0-0
0-0
0-0
EMA LUBRICANTS CO. LTD.
T: +971 650 626 00
P.O. Box 22316, Sharjah, UAE.
