+971 650 626 00 | Enquire Now
Passenger Vehicle
Lubricants
Commercial Vehicle Lubricants
Industrial & Marine Lubricants
Home Commercial Vehicle Lubricants Lubricating Greases Mobilgrease™ XHP 320 Mine Series
Mobilgrease™ XHP 320 Mine Series
The Mobilgrease™ XHP Mine products are specifically designed for the lubrication of extra heavy-duty off-highway and mining equipment. With a complete range of NLGI Grades, this series of lithium complex greases, which contain 5% molybdenum disulfide, can be utilized over a wide range of operating conditions and temperatures to improve productivity. The Mobilgrease™ XHP Mine series has excellent extreme pressure and anti-wear properties in addition to exceptional staying power, very good water wash-out, water spray-off, and extended service capabilities under harsh operating conditions. These extra heavy-duty service greases exhibit excellent structural stability. They will not corrode steel or copper bearing alloys and are compatible with conventional sealing materials.
Mobilgrease™ XHP 320 Mine, 321 Mine, and 322 Mine were developed especially for their superior performance in bucket pins, pivot pins, and heavily loaded chassis components. Mobilgrease™ XHP 100 Mine and 320 Mine are especially suited for heavy equipment central lubrication systems requiring an NLGI 0 Grade grease. Mobilgrease™ XHP 100 Mine and 320 Mine are recommended by ExxonMobil for use in central lubrication systems found on off-highway and mining equipment. Mobilgrease XHP 100 Mine exhibits good dispensability down to -30°C (-22°F). Mobilgrease™ XHP 321 Mine is a NLGI 1 Grade with very good low temperature pumpability developed for use in colder temperatures. Mobilgrease™ XHP 322 Mine is a NLGI 2 Grade for use as a general purpose chassis lube.
Features and Potential Benefits
™™™
Mobilgrease™ XHP 100 Mine, 320 Mine, 321 Mine, and 322 Mine were specifically designed to meet the needs of off-highway and mining equipment that required exceptional EP / anti-wear performance and which would remain in place even in tough conditions of water spray, high sliding, and high temperatures. These greases offer the following features, advantages, and potential benefits:
Features
Advantages and Potential Benefits
Excellent EP and anti-wear properties
Superb equipment protection and potential equipment life extension even in severe operating conditions
High level of molybdenum disulfide
Optimum equipment protection in high sliding mechanisms and with extended re-lubrication intervals
Exceptional resistance to water washout and spray-off
Ensures proper lubrication and protection even in hostile work environments
™
Provides excellent low temperature pumpability and start-up performance, a key feature for remote applications
Specifications and Approvals
Mobilith™ SHC Series meets or exceeds the requirements of:
100
007
220
221
460
1500
1000 Special
DIN 51825: (2004-06)
DIN 51826: (2005-01)
КРНС 2N-40
-
КРНС 2N-30
-
КРНС 1-2N-40
-
КРНС 1-2N-30
-
KPFHC 2N-30
-
-
-
-
GPHC 00K-30
Mobilith™ SHC Series has the following builder approvals:
100
007
220
221
460
1500
1000 Special
AAR-942
MAG IAS, LLC
X
P-73
-
-
P-64
-
-
X
-
P-81
Typical Properties
Mobilgrease™ XHP Mine Series
Applications
Mobilgrease™ XHP 100 Mine, 320 Mine, 321 Mine, and 322 Mine are recommended for severe off-highway and mining applications in terms of operational severity and water spray. Specific applications include:
- Bucket pins, pivot pins, and heavily loaded chassis components
- Heavy equipment central lubrication systems
- General purpose chassis lubrication
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended applications and the recommendations provided in the Material Safety Data Sheet. MSDS’s are available upon request through your sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
Refer to your vehicle service manual for correct lubricant requirement and service intervals. Search the database for the latest product data sheet you need here.
NLGI Grade
Color, Visual
Molybdenum Disulfide, Wt. %
Penetration, Worked, 25° C, ASTM D 217, mm/10
Dropping Point, °C, ASTM D 2265
Viscosity of Oil, ASTM D 445 cSt @ 40° C
Penetration Consistency Change, Roll Stability, ASTM D 1831, mm/10
Water Washout, ASTM D 1264, 79 °C, % Loss
Water Sprayoff, ASTM D 4049, % Loss
U.S. Mobility, AM-S 1390, gms/min (°C/'F)
4-Ball Wear Test, ASTM D 2266, Scar, mm
Corrosion Prevention, ASTM D 1743, Rating
Copper Strip Corrosion, ASTM D 4048
4-Ball Weld Load, ASTM D 2596, Kg
Thickener Type
1.5
Grey Black
5
370
200
100
-10
-
-
10 (-291-20)
0.4
Pass
1A
400
Lithium
Complex
2
Grey Black
5
370
270
320
0
-
-
-
0.4
Pass
1A
400
Lithium
Complex
1.5
Grey Black
5
325
270
320
±10
10
28
15 (-7/20)
0.4
Pass
1A
400
Lithium
Complex
00
Grey Black
5
280
270
320
±10
2
16
11 (-12/10)
0.4
Pass
1A
400
Lithium
Complex
100 Mine
320 Mine
321 Mine
322 Mine
EMA LUBRICANTS CO. LTD.
T: +971 650 626 00
P.O. Box 22316, Sharjah, UAE.
